Vidyo Konftel 300 Guide de l'utilisateur télécharger pdf (Page 14)

SWITCHING LINES DURING CALLS

Connecting a new line during a call

You can add another line or switch between connected lines during a call.



Press the LINE MODE button during the call.

An indicator appears on the display screen in front of the selected line(s).



Use the arrow buttons to mark the line you want to connect and conrm your choice

by pressing .

If you selected USB or MOBILE, this line will open. You then connect the call via the computer or

mobile phone.

If you selected ANALOGUE, you will hear a dialling tone. You then dial the number on the Konftel

300 or use the Phonebook.



Please note that an analogue line and a mobile line cannot be used simultaneously.

If you are using ANALOGUE or ANALOGUE+USB as a line connection and you wish

to connect MOBILE during a call, the ANALOGUE line will be put on hold. This is

indicated by a ashing LED on the display screen.

Putting a line on hold during a call



Press the LINE MODE button during the call.



Use the arrow buttons to mark the line you want to put on hold and press the HOLD

button.

The indicator in front of the selected line starts to ash.



Repeat the above to reconnect the line.

Disconnecting a line during a call



Press the LINE MODE button during the call.



Use the arrow buttons to mark the line you want to disconnect and conrm your

choice by pressing .

The indicator in front of the selected line goes out and the line is disconnected. The other calls

can continue.

DURING A CALL

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 32 33

Pas de commentaire

Vidyo Konftel 300 Guide de l'utilisateur Page 14